Concrete Cleaning in Canton, Ohio
Concrete here is old poured concrete: aprons, front walks and porch slabs that have absorbed decades of road salt and need surface-cleaner passes and stain treatment rather than a wand.
Canton is a city of early-twentieth-century brick, tree-lined interwar streets, and post-war residential blocks that have taken close to a hundred Ohio freeze-thaw cycles.
On the commercial side, Canton means storefronts, restaurant patios, and drive-thru pads that get missed by parking-lot sweeping.
How we do it
Different concrete surfaces, joints, and drainage conditions call for different handling. Assessing first — instead of using one setting everywhere — is what protects joints and gets a consistent result.
- Assess Condition & Drainage. We assess the concrete's condition, joints, and drainage before starting.
- Pre-Treat as Needed. Applicable buildup is pre-treated as needed.
- Clean at Appropriate Pressure. We clean with pressure appropriate to the surface.
- Review for Consistency. We review the result for a consistent finish.
The method does not change from one town to the next — what changes is what we find when we get there. The full concrete cleaning page has the rest of it.
What it costs in Canton
A mid-century ranch on the north or northwest side, the most common house in Canton, is {{price:house-wash:1500}} up to 1,500 square feet of home. The two-story Revival houses in Ridgewood are {{price:house-wash:2000}} at 2,000 square feet — the same as any other house that size, because there is no charge for a second story and no material surcharge on brick. Two-car driveway cleaning is {{price:driveway:two-car-driveway}}, which on this side of town is usually a salt-and-scaling conversation before it is a dirt one.
Here is the whole table. Find the size that matches and that is the price in Canton — not a starting point, not an average, and not a figure that moves when we arrive.
Concrete & Flatwork
Sidewalks, walkways, porches, pads and slabs, by measured area.
| Size | Price | Added to a house or roof wash | Typical time on site |
|---|---|---|---|
| Up to 500 sq ft | $119 | $95 | 1 hr |
| 501 - 1,000 sq ft | $145 | $116 | 1 hr 30 min |
| 1,001 - 1,500 sq ft | $259 | $207 | 1 hr 45 min |
| 1,501 - 2,000 sq ft | $319 | $255 | 2 hr |
| 2,001 - 2,500 sq ft | $389 | $311 | 2 hr 30 min |
| 2,501 - 3,000 sq ft | $449 | $359 | 2 hr 45 min |
| 3,001 - 3,500 sq ft | $529 | $423 | 3 hr 15 min |
| 3,501 - 4,000 sq ft | $619 | $495 | 3 hr 45 min |
| 4,001 - 4,500 sq ft | $719 | $575 | 4 hr 15 min |
| 4,501 - 5,000 sq ft | $819 | $655 | 4 hr 45 min |
Added to a house wash or roof soft wash, this comes at the add-on price. The saving is real rather than a discount dressed up: the drive, the hookup, the mix and the pack-down are paid for by the first service on the visit, so the second one genuinely costs us less to do.
Included: Surface cleaning and an algaecide post-treatment.
Not included: Oil, rust and paint stains are treated separately. Sealing is quoted per job.
Condition, joints and drainage get assessed first, spots are pre-treated, then the flatwork is cleaned in controlled passes at a pressure the concrete tolerates and reviewed for consistency before we move on. Where flatwork meets landscaping or a different material, the transition is detailed by hand.
Concrete looks uniform and is not. Age, finish, how it was cured and how much salt it has taken all change what it will give up, and two slabs poured the same year at the same house can behave differently. Working to the surface in front of us rather than to a fixed setting is the difference between an even result and a patchwork. Drainage matters as much as pressure: solution and lifted soil have to leave somewhere, and that somewhere should not be a flower bed or a window well.
What to expect: Expect an even, uniformly lighter surface rather than a bright white one — concrete cleans back to its own colour, not to new. Shaded flatwork under trees will start greening again sooner than open slabs, which is what the algaecide is for.
Worth adding: Concrete Sealing. Sealed concrete holds its result up to about three years rather than one, and it keeps salt out of the surface over winter instead of letting it soak in. It is quoted per job, and it only works on concrete that is genuinely clean and fully dry first.
Ohio does not charge sales tax on flatwork — driveways, walks, patios and concrete — so the figure above is the figure, in Canton and everywhere else we work.
Where we work in Canton
- Glenmoor
- Avondale
- Washington Square
- Ridgewood
- Sippo Lake
- Harter Heights
- Hills and Dales
- Crystal Park
- Colonial Heights
- Harrison Hills
- Applecrest
- Market Heights
Also in Canton
Concrete Cleaning in other towns we cover
Worth reading first
Concrete Cleaning in Canton — common questions
Can decades of road salt come out of my Canton driveway?
Partly — and here is the line between what lifts and what does not. Canton concrete is generally old poured concrete — aprons, front walks and porch slabs that have absorbed years of de-icing salt, tree tannin and traffic. Surface-cleaner passes plus targeted stain treatment lift the organic staining and much of the discoloration. What they do not do is reverse scaling, where the salt has already broken the top layer loose; more pressure there just opens the aggregate further and makes it worse. On the estimate we separate what will clean from what is permanent surface damage, so you know what you are buying.
Where is SurfaceWorks ProWash based?
We are based in Canton, Ohio, on 29th Street NE, and most of our work happens within a short drive of it. Canton itself is a mix of older brick, poured concrete that has been through decades of Ohio winters, and asphalt shingle roofs, and each of those takes a different method. Being close by means a shorter wait for an appointment and the ability to come back if something needs a second look. You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and it is the price you pay when you accept it.
I own a home in a historic district. How do you clean it without harming original materials?
Historic exteriors get the gentlest method that will do the job: low-pressure soft washing, solutions matched to the material, and a test in an inconspicuous area before committing to an approach. Original brick, aged mortar, wood clapboard, painted trim, and old glazing all fail under pressure that modern vinyl shrugs off, so pressure is not the tool. We inspect for failing paint, open joints, and loose material first and tell you what we would leave alone. Districts like these are part of our regular work in Canton’s Ridgewood area, Medina, Wooster, and Mansfield.
I run a restaurant in Canton with sidewalk seating. How often should the concrete be cleaned?
For a patio and sidewalk frontage in a DORA footprint, a recurring interval beats one-off cleaning almost every time. A restaurant with frontage is judged on how its concrete looks before anyone reads the menu — grease traffic, spills and organic growth come back on a predictable cycle, so cleaning on a schedule holds appearance instead of chasing it. Whipple Avenue and Cleveland Avenue N are dense enough that we can route several accounts together, which is what makes an interval affordable. We will quote both a one-time clean and a recurring interval so you can compare them. The [maintenance plan](/maintenance-plan) is built for exactly this: an autumn visit, next year's price held, and a longer roof warranty.
My house is in Ridgewood. Can it be cleaned without damaging the brick or mortar?
Yes, but only at low pressure. The Tudor, Georgian and French-Norman houses in Ridgewood were architect-built in the early 1900s, and their brick, mortar and painted wood will not tolerate pressure that modern concrete shrugs off. We clean them with the correct solution and enough dwell time to do the lifting, then rinse in a controlled way that keeps water out of the joints. Because the district has been on the National Register since 1982 and its look is part of what people bought into, the standard we work to is that the job leaves no etching, no striping and no damaged mortar behind.
I have a mid-century ranch on Canton's north side. What actually needs doing?
Usually two things, and they are different jobs. The shaded roof slope carries algae streaking on asphalt shingle, which is a low-pressure soft wash and nothing else — walking or pressuring a shingle roof costs you shingle life. The siding on the elevation that has faced south for forty years is often chalky oxidation rather than dirt, meaning the finish itself has broken down, and a plain rinse only wets it down. Oxidation treatment is what corrects that. We tell you on the walk-through which of those two you actually have, because they carry different prices and different outcomes. Why a wash leaves chalky siding chalky-looking, and what actually improves it, is explained in [why a wash will not bring the color back](/learn/why-a-house-wash-will-not-fix-chalky-siding).
Learn More — what siding oxidation is and why pressure washing won't fix it
Can I get my price without talking to anyone?
Yes. Put in your name, a way to reach you and the property address, and the next screen has your prices on it. We look your home up from the address — we are able to determine the square footage, and we measure your roof from aerial survey data, so the roof price is measured rather than guessed. Choose what you want cleaned, and you get an itemised estimate on its own page: every line, the sales tax at your county's rate, and what the price assumes. It is texted and emailed to you as well, so you can think about it and come back. Nothing is booked until you accept it, and you can leave off anything you do not want first. You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.
Can you get oil spots and tire marks off my driveway?
Oil, transmission fluid, and tire marking are treated as their own step, with a targeted pre-treatment applied to those spots before the concrete is cleaned in passes. Fresh surface oil usually comes up well, while fluid that has soaked deep into older, porous concrete tends to lighten rather than disappear. We look at stain age, how porous the slab is, and whether anything has been applied to it before, then tell you what to expect before we start.
The original driveway on my 1950s Massillon house looks rough. Worth cleaning?
Usually yes, with a clear expectation set first. Out from the core you get 1950s raised ranches and midcentury singles whose original concrete drives and porch slabs are the real problem — decades of de-icing salt, tree tannin and tire traffic. The right approach is a surface cleaner plus stain treatment, not more pressure, because pressure on concrete that age opens the aggregate. On the walk-through we separate the organic staining and tannin that will release from the scaling and wear that will not. That way the number you get matches the result you get.
Do you really travel to the outer cities, or mostly stay near Canton?
We travel. Cleveland, Solon, Youngstown, Mansfield, and Dover are regular work rather than exceptions. Because they are a longer drive, jobs in those directions are scheduled as full days or grouped with other work heading the same way, so there is a little less flexibility on exact dates. Larger and multi-surface scopes are the easiest to fit at that distance. Build the estimate and you have the price; we confirm a realistic window when you accept it. You can get your own number right now: the [instant estimate](/instant-estimate) prices your property from the address in about two minutes, and what you accept is what you pay.